Services
CNC milling services
Vertical machining centres with drilling and tapping in the same setup — housings, brackets and covers milled to 0.005 mm in aluminium, stainless and brass.
- Vertical machining centres, drilling and tapping on the same setup
- 0.005 mm on milled features, ±0.01 mm general tolerance
- Aluminium, stainless, brass and alloy steel from stock
Your drawing stays confidential
- 0.005 mmMilled feature accuracy
- 1 setupMill, drill and tap
- 3–7 daysDrawing to sample
- 6061-T6Main aluminium grade
Trusted by customers
Product families this service covers
Capabilities
What this service covers
Aluminium housings & shells
6061-T6 housings, shells and adapters milled and anodised, with 1–20 mm wall thickness.Brackets, covers & plates
Milled brackets and covers with drilled and tapped holes held from the milled datum.
Stainless milled parts
Milled stainless components passivated on request, for wet and washdown environments.Why Lock
Why milled parts come back square
Holes follow the datum
Drilling and tapping happen in the same setup as the milling, so a hole is measured from the face that was just milled, not from a second fixture.
Wall thickness quoted, not discovered
Thin walls move under clamping. Where the print asks for 1 mm, the fixture and the pass sequence are planned with that in mind.
Finish in the same order
Anodising and passivation are quoted with the milling, so the pre-finish dimension accounts for the coating.
How it works
From drawing to delivered parts
A short, fixed route — no back-and-forth before you have a price.
- 01
Send your drawing
A 2D drawing, a STEP/IGES file — or mail us a sample.
- 02
Quote & DFM review
An engineer replies within 10 hours: price, lead time, DFM notes.
- 03
Confirm the sample
First article ships with an inspection report before mass production.
- 04
Production & shipping
Machined, inspected, packed and shipped with full traceability.
Leave a Message
We reply within 10 working hours.
FAQ
Common questions
Can you mill and anodise in one order?
Yes. Finish and tolerance are quoted together, because anodising grows into the surface and the pre-finish dimension has to be set with that in mind.
What tolerance can you hold on a milled pocket?
0.005 mm on the features the drawing marks as critical, ±0.01 mm on general tolerance. Tell us which dimensions actually matter and the setup is planned around those.
Do you charge for fixtures or programming?
There is no tooling charge on milled work. Programming and fixtures are part of the quoted piece price.
Is my drawing confidential?
Your drawing is used only to quote and make your parts. An NDA can be signed before you upload, and files stay on our own server and are deleted after 180 days.
What is your minimum order?
One piece for machined parts. Stamping and cold-formed fasteners start from the tooling, which is quoted as its own line.
How do you ship, and who handles customs?
EXW, FOB, CIF, DDU or DDP — we can deliver to your warehouse and handle the clearance.
Have a drawing for this part?
Send it over — we will tell you what it costs and whether it is the right process.
STEP · STP · IGES · X_T · DWG · PDF · SLDPRT