Factory tour
30,000 m² in Pingshan, Shenzhen
Cold heading, thread rolling, turning, CNC machining, milling, grinding and stamping — over 900 production and testing machines, in a plant we own and audit.
- 30,000 m²Plant area
- 900+Production and testing machines
- 9Processes in house
- 2006Manufacturing since
Production line
From coil to packed carton
Wire and bar stock arrive on coils, and the route is chosen from the feature that is hardest to hold. Cold headers form the blank, thread rollers cut or roll the thread, CAM and CNC lathes turn the precision features, and presses stamp what cannot be formed.
Secondary operations — heat treatment, plating, passivation, assembly — run with qualified partners audited every year, so the finished part leaves with one inspection report rather than one per operation.
Equipment
What runs on the floor
| Process | Equipment | Typical parts |
|---|---|---|
| Cold heading | Multi-station headers, 1–5 die | Precision screws, special-shaped bolts, nuts |
| Thread rolling | Flat-die and cylindrical thread rollers | Threaded fasteners from M0.6 to M12 |
| Turning | CAM lathes, CNC lathes, Swiss-type | Shafts, pins, inserts, connector shells |
| Milling | Vertical machining centres, drilling and tapping | Housings, brackets, covers |
| Grinding | Surface and centreless grinding | Ground shafts, flatness-critical faces |
| Stamping | Progressive presses, high-speed presses | Terminals, contacts, shields, clips |
OEM / ODM
Why programmes stay here
Machines and tooling in house
Forming, machining and stamping share one floor, and the dies are made here — a revision does not wait for a supplier.
Parts for many industries
Automotive, consumer electronics, medical, communications and instrumentation, in the same plant.
Engineers follow the order
A named engineer tracks the programme from first article through mass production, not just the quotation.
Material knowledge
Stainless, carbon and alloy steel, brass, copper, aluminium and engineering plastics — with the finish that suits each.
Engineering
From sample to series
R&D runs through the whole chain: concept review, material and process selection, sample build, trial assembly and mass production. Application engineering is free of charge and starts from your drawing or a physical sample. DFM notes come back with the price, so a feature that would double the cost is caught before tooling.
Samples ship with an FAI report covering every dimension and the critical ones in detail, plus material, plating and RoHS documentation where the drawing calls for it.
Can't see your part?
Most of what we ship is not in this catalogue — send the drawing and we quote to your specification.
STEP · STP · IGES · X_T · DWG · PDF · SLDPRT