Services
Custom screw manufacturing
Non-standard screws made to your drawing — special heads, drives, threads and coatings, from M0.6 up, cold-headed and thread-rolled in our own workshop.
- Special heads, drives, threads and coatings to your drawing
- Heading dies and thread rolls cut in our own tool room
- M0.6 to M24 in stainless, carbon and alloy steel
Your drawing stays confidential
- 2006Manufacturing since
- M0.6Smallest thread
- 3–7 daysDrawing to sample
- 40+Countries served
Trusted by customers
Product families this service covers
Capabilities
What this service covers
Micro screws
Threads from M0.6 up, deburred and inspected under magnification before counted packing.
Special heads and drives
Pan, cheese, truss, fillister and security Torx recesses cut into the heading die, not added afterwards.Thread-forming screws
Self-tapping, self-drilling and thread-rolling points for sheet, plastic and castings.
Long screws and studs
Extra-length screws and studs up to M24, headed or turned where the length rules out cold heading.
Stainless and alloy screws
A2/A4 stainless, carbon and alloy steel, with the coating matched to the service environment.
Machined screw features
A turned shoulder, undercut or cross-hole added to a headed blank, held to ±0.01 mm.Why Lock
Why the screw stays in our own tool room
Dies and rolls made in house
Heading dies and thread rolls are cut in our own tool room, so a special head or drive adds days to the sample rather than weeks to the project.
Gauged on the finished screw
Thread size, head concentricity and drive depth are checked on the part you receive, not inferred from the blank.
Your drawing stays yours
NDA on request. Files are never shared with third parties or reused for another customer.
How it works
From drawing to delivered parts
A short, fixed route — no back-and-forth before you have a price.
- 01
Send your drawing
A 2D drawing, a STEP/IGES file — or mail us a sample.
- 02
Quote & DFM review
An engineer replies within 10 hours: price, lead time, DFM notes.
- 03
Confirm the sample
First article ships with an inspection report before mass production.
- 04
Production & shipping
Machined, inspected, packed and shipped with full traceability.
Leave a Message
We reply within 10 working hours.
FAQ
Common questions
What counts as a non-standard screw?
Anything the catalogue does not cover: a head geometry, drive recess, thread pitch, point or coating that is not a stock item. A 2D drawing or a sample screw is enough to quote — we measure it and work from that.
Do you charge for heading tooling?
Yes, and it is quoted openly as a separate line rather than folded into the unit price. The die stays with your part number, so a repeat order does not pay for it again.
What range of sizes do you cover?
M0.6 at the small end, up to M24 for long screws and studs. Lengths follow the drawing; anything outside that range is quoted case by case.
Is my drawing confidential?
Your drawing is used only to quote and make your parts. An NDA can be signed before you upload, and files stay on our own server and are deleted after 180 days.
What is your minimum order?
One piece for machined parts. Stamping and cold-formed fasteners start from the tooling, which is quoted as its own line.
How do you ship, and who handles customs?
EXW, FOB, CIF, DDU or DDP — we can deliver to your warehouse and handle the clearance.
Have a drawing for this part?
Send it over — we will tell you what it costs and whether it is the right process.
STEP · STP · IGES · X_T · DWG · PDF · SLDPRT